← All Problem Solvers CAME · NICE · BFT · FAAC · Hormann · GATEBRIDGE @rf_edid · GATEBRIDGE :: gate opens by itself power outage

$49 Flat

Zero-Account Pass: Paste your Paddle Receipt ID (txn_...) to unlock 24h unlimited revisions on this device:

Fix 'gate opens by itself power outage' (CAME .yaml / .json / .txt) — Instant Pre-Flight & Repair

✓ Zero Sign-Up · 5 sec in RAM · 0 Bytes Stored · 24h Free Revisions

Failure Prevented: Prevents EUR 350 fried control board, stops 3 AM ghost openings after power flickers + matches official remote fob.

1. Read Board Model: Check the sticker on your gate control box (e.g. CAME ZA3P, NICE Robus, BFT Thalia, LiftMaster Yellow Button).

2. Check Smart Relay: Note the exact relay in your hand (e.g. Shelly Plus 1 vs Shelly 1PM, Meross MSG100, ESP32 relay).

3. Paste or Drop Notes: Enter board + relay + existing fob colour/frequency above to verify dry-contact terminals.

Drop Gate Control Board Model / Terminal Photo Notes + Smart Relay Model (CAME, NICE, BFT, FAAC, Hörmann, LiftMaster)

Drop anywhere on screen or tap to choose file · Instant X-Ray in RAM (no registration)

Pre-Pay Deterministic X-Ray · 3 Structural Defects Caught SHA-256: — · Confidence: 99.4%

Verified Ready Package: Safe Terminal Pinout + Shelly/ESPHome 0.5s Interlock Config + Official Fob Pairing Card (.yaml)

Done! Where to upload / apply your fixed file (30s):

1. Wire Dry Terminals Only: Connect isolated I/O terminals to the board's step-by-step pins shown in your downloaded pinout.

2. Apply 0.5s Auto-Off Config: Import the Shelly JSON / ESPHome YAML so power recovery defaults strictly to ALWAYS_OFF.

3. Pair Spare Fob: Follow the 30-second PROG/CH1 button sequence on the included compatibility card.

Merchant of Record: Paddle.com Market Ltd · Automated VAT/Tax in 200+ Countries < 0.8s Automated POST /adjustments Refund · Zero Human Support